KT1000 MINI VOICE RECORDER


Peace. Privacy. Protection.

The KNIGHT KT1000 is an advanced audio recorder and player for clear, high quality audio capture and playback of meetings, classes, and other in-room recording needs. Its one-of-a-kind design combined with its lightweight size and magnetic force make it the most versatile audio recording device on the market, perfect for almost any situation.

IN THE BOX

  1. Audio Recorder
  2. Micro-USB to 3.5mm Audio Jack Adapter
  3. Wired Earbuds
  4. Micro-USB to USB Charging Cable

 

GET STARTED

Step 1: Charge the audio recorder by connecting the supplied USB cable to a computer port. After charging is complete, disconnect from the charging cable.

Note :
The RED light will stay on while charging. The BLUE light will turn on when fully
charged.

Step 2: Turn it ON and begin recording by sliding the power switch to the left.

Note:
Immediately after switching the device on, you will see a PURPLE light for 3
seconds followed by a RED light for 6 seconds followed by 3 short BLUE light
blinks. This signifies that the audio recorder has turned on and begun recording.

Step 3: After you are finished recording, switch the device OFF which saves and stops the recording.

Step 4: Listen to your recording by either connecting the KT1000 to your computer using the charging cable or by connecting the included earbuds directly to the recorder. See more detailed instructions and tips on connecting your computer on the next page.

CRITICAL NOTE: Make sure the device is turned OFF before you connect it to your computer. If it is turned on, the computer will not recognize the device. Your recordings can be found in the “RECORDED” folder.

Step 5: Set the time stamp by connecting the recorder to your computer and double clicking either the “WINDOWS-SET TIME” or “MAC OS-SET TIME” folder (depending whether you have a Windows PC or a Mac) and following the directions of the relevant time setting PDF document (i.e., “WINDOWS-SET TIME” for PC or “MAC OS-SET TIME” for Mac).

Note:
You may also see more detailed time stamp setting instructions in the following pages.

Step 6: Enjoy the added benefits of having a KNIGHT by your side!

Note:
AFTER you have read this entire manual and watched our instructional video, if you still have questions or issues, please feel free to email us at Hello@KnightSecurity.io or call our US based customer support at +1 224 477 5846 and we will be happy to help.

CONNECT TO YOUR COMPUTER

Step 1: Turn the recorder’s power switch to the OFF position.

Step 2: Connect the audio recorder to your computer using the included micro-USB to USB cable.

Note:
After connecting, you will see the below folder pop up. If you do not see this folder pop-up, then please manually locate your USB drive and open it.

SET TIME

 Time settings can be synced to your computer using Mac or PC. You may read the instructions for both Mac and PC below or open the PDF files named “WINDOWS-SET TIME” for PC or “MAC OS-SET TIME” for Mac.

PC Time Setting Instructions

Step 1: Open the “WINDOWS-SET TIME” folder. You will see the below.

Step 2: Double click the “SETTIME.exe” file.

Step 3: A “Success on setting device time” window will open.

Step 4: Click OK.

Note:
This process works only for Windows computers.

MAC Time Setting Instructions

Step 1: Open the “MAC OS-SET TIME” folder and double-click the TXT document “TIMESET.txt” to open it.

Step 2: Click the date “13:37 2022/4/19” and change it to your current time.

Note:
Use MILITARY TIME and the hh:mm YYYY/MM/DD format. For example, 9:30 pm would be entered as “21:30”.

Step 3:  Click “File” and select “Save.”

Step 4: Copy the now updated “TIMESET.txt” file and paste a copy of it alongside the “RECORDED,” “SETTINGS,” “WINDOWS-SET TIME,” and “MAC OS-SET TIME” folders.

Step 5: Unplug the recorder from your computer and turn it on.

Note:
The recorder will automatically read and update the time which completes the time setting process.

LISTEN TO YOUR RECORDINGS

Listen Using Earbuds

Step 1: Insert the earbuds into the included micro-USB to 3.5mm audio jack adapter and insert the micro-USB end into the KT1000 recorder.

Step 2: Turn the power switch to the ON position. The BLUE light will flash continuously to indicate that it is in playback mode.

Step 3: Listen. Your recordings will begin playing automatically.

Step 4: Press the play/pause button to pause/play the recording.

Step 5: Press and hold the + button to increase the volume.

Step 6: Press and hold the - button to decrease the volume.

Note: You will hear a beep sound when adjusted to the minimum or maximum volume.

Step 7: Press the + button to switch to the next recording.

Step 8: Press the - button to switch to the previous recording.

Step 9: Press the pause button first, followed by pressing and holding the + button or the - button to fast forward or rewind a recording.

Note:

The fast forward / rewind buttons only work when the recording is paused.

Listen on the Computer

Step 1: Turn the recorder’s power switch to the OFF position.

Step 2: Connect the KT1000 to your computer.

Step 3: Open the “RECORDED” folder.

 

Note:
You will see your collection of audio recordings.

Step 4: Open your chosen audio file and listen.

CRITICAL NOTE: IF your computer’s default audio player does not work to playback the .WAV audio files, please use another audio file player. Recommended audio players include but are not limited to the following:

  • WINDOWS MEDIA PLAYER
  • VLC PLAYER
  • GROOVE MEDIA PLAYER

Note:
To use a different media player, simply right click the .WAV file, click “Open with” and select / download one of the above recommended media players. See below.

 CHANGE THE SETTINGS - VOICE ACTIVATED RECORDING (VOR)

This audio recorder gives you the option of recording normally (i.e., recording non-stop even if there is no sound) OR recording with voice-activated recording (VOR) mode (i.e., only recording when sound is heard and not recording when there is silence). The default recording mode is VOICE ACTIVATED RECORDING.

Step 1: Open the “SETTINGS” text document.

Note:
You will see the following text: “VOR:1 //Voice activated recording setting: 0 for OFF, 1 for ON”.

Step 2: To turn ON VOR, change the number after the colon (:) to 1.

Step 3: To turn OFF VOR, change the number after the colon (:) to 0.

Step 4: Select File, Save.

CRITICAL NOTE: Recordings made with VOR will be saved with “V” at the beginning of the file name. Recordings made with normal recording will be saved with “R” at the beginning of the file name. See the below pictured example.

CRITICAL NOTE 2: When using VOR, the recorder will automatically stop recording when the detected decibel level falls below the preset sensitivity level. It will start recording again when sounds are detected.

CHARGING, BATTERY, AND STORAGE

Charging: For the longest battery life, it is recommended to charge by connecting the included charging cable to a computer port or any low output power adapter which only outputs >=500mA. The audio recorder may also be charged with a standard >=1000mA cell phone power adapter. However, using a computer port or >=500mA adapter may result in a relatively longer battery life over time.

Battery: The KT1000 KNIGHT audio recorder contains a 440 mAh battery which allows it to record non-stop for about 3 full days before turning off and needing to be re-charged. After the device runs out of battery, it will save the last recording automatically and you can find it in your “RECORDED” folder. The battery’s charging time is about 2-3 hours until fully charged.

Storage: The KNIGHT KT1000 contains a massive, built-in 64GB storage capacity which equates to around 800 hours (about 33 full days!) of total recording time. If the storage capacity ever becomes completely full, the device can no longer record and you will need to delete some recording files in order to create some more storage space (which will then enable recording again).

TIPS AND TROUBLESHOOTING

  • The recorder has a BUILT-IN MAGNET for easy mounting to metal surfaces (i.e., under desks, tables, cabinets, furniture, appliances, etc.).
  • This recording device is very sensitive. Avoid placing it on surfaces that vibrate to reduce static and fuzz in the recordings.
  • Contact with the recorder during recording may cause static or noises over the recording.
  • For the cleanest and clearest recording, it is recommended to have the holes uncovered and in a stationary location (i.e., peaking out of a pocket, inside a purse yet not completely covered, etc.).
  • In the event of receiving the below pictured pop-up, please select “Continue without scanning.”

USE AS AN MP3 PLAYER

This KT1000 audio recorder may also be used as an MP3 player. You may copy both .WAV and .MP3 files (i.e., your favorite music) both from the recorder to your computer and from your computer to the recorder.

Step 1: Please copy files into the “RECORDED” folder in order to listen to them with headphones.

Note:
Whichever files are located in the “RECORDED” folder are available for playback on your KNIGHT KT1000.

Note 2:
The RED and BLUE lights will flash when transferring data between your computer and the recorder.

Step 2: Plug in your headphones and listen.

RESET

If the recording device freezes or does not perform as expected you can reset the device.

Step 1: Turn the switch to the ON position.

Step 2: Use a paperclip, toothpick or pin to push the reset button inside the hole on the far left labeled “RESET”.

CRITICAL NOTE: Please be sure to not stick a pin into the LED indicator light.

Step 3: The device will restart.

CONSIDERATIONS & PRECAUTIONS

  • DO NOT use this KNIGHT KT1000 audio recorder in an unlawful or unreasonable manner. Please only use in a way which is compliant with the prescribed laws of your region.
  • DO NOT disconnect the recorder from the computer while transferring data.
  • DO NOT listen to playback at high volumes to avoid damage to your hearing.
  • DO NOT open, or modify this product.
  • DO NOT use in water, wet environments, hot, cold, or dusty environments.
  • Turn the power switch to the OFF position when storing the recorder.
  • Back up the recorder’s data on your computer before storing it.
  • This product contains small parts. Keep out of the reach of children.

PRODUCT SPECIFICATIONS

Thickness

0.3 Inches

Diameter

1.6 Inches

Weight

1 oz

Battery Size

440 mah

Battery Life

70 Hours

Storage Capacity

800 Hours

RAM Storage

64 GB

Recording Format

WAV

Recording Quality

192 kbps

Battery Charging Time 2 - 3 Hours

Sampling Rate

48 kHz

Playback Format WAV
Exterior Color Metallic
Exterior Material ABS + Aluminum Alloy
Magnetic Strength 0.8 mm
Interface Type Micro USB
File System FAT32
System Compatibility WIN XP, WIN 7, WIN 8, WIN 10, IOS system, Linux
Signal-to-Noise Ratio ≥ 80dB
Operating Temperature 23°F - 104°F

 

WARNING:
This product can in no way guarantee any outcome including but not limited to your health or safety. Please do not depend on this audio recorder alone to improve your health or quality of life. For more information, please go to www.KnightSecurity.io.

LEGAL DISCLAIMER:
The use or misuse of this audio recorder is conditioned upon the user’s agreement that in no event shall the manufacturer, importer, reseller, or distributor of this audio recorder be liable for any direct, indirect, punitive, incidental, special consequential damages, to property or life, whatsoever arising out of or connected with the use of this audio recorder.